PCN Magnetic Particle Testing (MT) - Level 2 (Welds Category )
Why Attend This Course?
Candidates will have the opportunity to use a wide variety of equipment on welds products in this theoretical and practical course. This course is suitable for beginners as well as personnel with existing NDT knowledge. It is PCN recognized and provides excellent preparation for Level 2 MPI examinations. Additionally, it meets the training hour requirements specified by the relevant PCN documentation
Duration
52 Hours (6 days)
Price
IDR 6.000.000
Code
IINDT MT2
Special Note
Candidates attempting a PCN examination must meet the PCN/GEN requirements, which include a minimum of 4 months of industrial experience.
- Properties of magnetic fields
- Principles of magnetic particle inspection
- Magnetic particle inspection equipment
- Equipment calibration
- Defect detection and evaluation
- Magnetic particle inspection techniques
- Production of written technique
- Relevant standards
- PCN documentation
- Product technology
- Extensive practical element
Validated by BINDT and recognised by PCN
An individual certified to Magnetic Particle Testing Level 2 has demonstrated competence to perform NDT according to NDT procedures. Within the scope of the competence defined on the certificate, Level 2 personnel may be authorized by the employer to:
- Select the Magnetic Particle Testing technique for the test method to be used.
- Define the limitations of application of the testing method.
- Translate Magnetic Particle Testing codes, standards, specifications, and procedures into Magnetic Particle Testing instructions adapted to the actual working conditions.
- Set up and verify Magnetic Particle Testing equipment settings.
- Perform and supervise Magnetic Particle tests.
- Interpret and evaluate results according to applicable standards, codes, specifications, or procedures.
- Prepare written Magnetic Particle Testing instructions.
- Carry out and supervise all tasks at or below Level 2.
- Provide guidance for personnel at or below Level 2.
- Report the results of Magnetic Particle tests.
Full Magnetic Particle Testing PCN certification is only achieved once the required experience is acquired following the completion of the required training hours and passing of the examination:
- Magnetic Particle Testing
- Level 1: 16 training hours and 1 month of experience.
- Level 2:
- 24 training hours and 3 months of experience if Level 1 is held, or
- 40 training hours and 4 months of experience if going directly to Level 2.
- Level 3: 32 training hours (+80 hours for Level 3 Basic) and 24 months of experience.
Booking course
Contact us on +62 811 6911 899 or email for schedule to check availability
Meet the trainer
Mondera Amir
Tutor MT PT UT 3.1 3.2